Rgb Fans That Work With Asus Aura
- May 23, 2015
- 196
- 0
- 4,690
- 3
- #1
Is there any way I can connect either of the following two fans to these 4-pin headers? I want everything to be synced with Aura. (i only need one of these fans for the back/rear of case)
NZXT Aer RGB120
Thermaltake Riing 12 RGB
If this is possible, if additional connectors/adaptors are needed, could you please let me know which ones. Thanking you in advance.
My current partpicker list: https://uk.pcpartpicker.com/list/hqVjgL
- #23
I've now made a video... I've added instructions as subtitles so make sure you turn subtitles on! Also, in the description I've put links to different parts of the video.I've got my other two fans ordered and I'll make a video of how to fully do this once they arrive and link to it.
Link: HD120 Modification For Asus Aura & Gigabyte Fusion Compatibility
Video:
[video="https://www.youtube.com/watch?v=fW5bhAd_OFI&t=1s"][/video]
- Jan 30, 2017
- 1,142
- 0
- 5,960
- 201
- #2
NZXT Aer fans are controlled through NZXT CAM software.
The only RGB fans that I am aware of that are compatible with aura sync are the Cooler Master Master Fan Pro RGB
- Jul 15, 2011
- 15,519
- 0
- 66,960
- 1,665
- #3
though cant find my hue+ cables/extensions at the moment to see what connectors
on the end
would imagine though its just a case of making it fit the aura header
rather than that the aura software wont control it
- May 23, 2015
- 196
- 0
- 4,690
- 3
- #4
the madness!!
I'm certainly not gonna pay £100 for the hue+ set up so I'll stick with the white ringed corsair fans.
- Jul 15, 2011
- 15,519
- 0
- 66,960
- 1,665
- #5
guess you cant have everything
- Jul 15, 2011
- 15,519
- 0
- 66,960
- 1,665
- #7
but at least the asus aura is bog standard
so plenty cheap led stuff on ebay will run on that
you can buy the 4 pin rgb connectors already wired up for next to nothing and cut and splice all manner of led stuff to them
- May 23, 2015
- 196
- 0
- 4,690
- 3
- #8
- Jul 15, 2011
- 15,519
- 0
- 66,960
- 1,665
- #9
- Jan 30, 2017
- 1,142
- 0
- 5,960
- 201
- May 23, 2015
- 196
- 0
- 4,690
- 3
- #11
I've checked online already - hardly not much at the mo.
- Jan 30, 2017
- 1,142
- 0
- 5,960
- 201
- #12
http://www.coolermaster.com/cooling/case-fan/masterfan-pro-120-ab-rgb/
http://www.corsair.com/en-us/landing/rgbfans
http://www.akasa.com.tw/update.php?tpl=product/product.detail.tpl&no=181&type=Fans&type_sub=LED&model=AK-FN093
- May 23, 2015
- 196
- 0
- 4,690
- 3
- #13
- May 23, 2015
- 196
- 0
- 4,690
- 3
- #15
Now i gotto work out air flow pull and push, which will be best for my case
- #17
- Jan 11, 2017
- 107
- 0
- 1,690
- 4
- #18
I know im late but i may have a bit of a solution for this. Phanteks may be releasing rgb fans at computex this year. And i think theyll be compatible with aura andmystic light
- #19
- #20
Firstly, I'm 16 so you can definitely give it a shot.
Before I came up with a proper solution I managed to blow 2 Corsair SP120 RGB fans.
1) I attempted to connect a 12v LED strip driver to the fan LED connector - It worked very bright for a few seconds then fizzled and smoked.
I did some research and found out they're 5v LEDs...
2) I used a 5v positive wire from a cut USB cable and a 12v negative wire from the led driver - No lights, fizzing or smoking but the smell was awful.
3) I used a 12v to 5v DC car adapter and used the positive and Red from the LED driver to convert down to 5v. It worked for a very short while very
dim but I couldn't get them to turn back on after... I plugged the fan into the corsair controller and into my current computer and it worked fine.
I then did some research as to why I couldn't get it to work at all and I found that the LEDs used on the SP120 fans are individually controllable and
use microchips within the LEDs. I then discovered the reason I couldn't get anything working is because the cable is: Positive, Data 1, Data 2, Negative.
Not Positive, R, G, B (Negatives). So after this discovery I gave up on the SP120 fans and returned the final working one.
I tried to find a standard RGB fan I could adapt to aura but had no joy. I eventually came up with an idea; the next model up Corsair fans (HD120) use the same LEDs as the SP120 but on a strip around the outside. This got me thinking whether I could disassemble the fan, remove the LED strip and add my own standard
non-waterproof 5050 RGB LED strip.I ordered a single HD120 fan to test my theory and it arrived the other day. So... I was struggling to get it open but I found this article in which someone opens the HD120 fan to access the LEDs but for a different reason: Imgur Article
I got the fan open a similar way to how described in the article and as I hoped the LED strip was directly exposed. I removed the strip from the fan and chopped the wire off it to use it. There was no returning the fan from point so I could only keep going.
I soldered the cable onto a standard 5050 RGB LED strip and cut the corsair connector off the other end and soldered it to a RGB LED strip connector. Next, I used heat shrink to cover the soldering at both ends and ensure the wires stay in position.
I then placed the strip around the fan and cut it as close as I could to a full lap at the cut points without it overlapping. I then fitted the wire into the exit slot and hot glued the soldered end in place from the wire's location. I then glued the other end in place ensuring that it was tight around the fan.
After this I reassembled the fan and was ready to test it. I'm building my new PC at the moment and it's my birthday next week so I'm hoping to get the remainder of my parts so I can't hook it up to Asus Aura yet. I connected the PWM from the fan to my fan controller just for test purposes and used my 12v LED strip driver from a DC adapter. I maxed the fan controller and hit the adapter at the wall...
It worked great! Firstly, the fan looks so much better in my opinion because the LED strip is 300 LEDs/m whereas the corsair strip is 150 LEDs/m. It all worked as I wanted it to and is the correct voltage for Asus Aura now. The only problem is that Asus Aura pins are: +GRB not +RGB but to solve this you merely cut and solder the middle two wires of the cable the other way round.
Hope this helps, I've got my other two fans ordered and I'll make a video of how to fully do this once they arrive and link to it.
- Jul 15, 2011
- 15,519
- 0
- 66,960
- 1,665
- #21
its always good when people think
"how can i do this"
not
"that this cant be done"
might have cost you cash and time
but learning stuff is nearly always useful at some point later
- #22
its always good when people think
"how can i do this"
not
"that this cant be done"
might have cost you cash and time
but learning stuff is nearly always useful at some point later
Cheers, I managed to get some of my money back because I bought the RGB edition of the Corsair Crystal 460x so I sold the two working SP120 fans and controller to get a bit towards the HD120s... They're more expensive but I've got all three upgraded now so it's all aura ready once I get the rest of my parts.
P.S. This method will work with Gigabyte Fusion RGB too (Just connect to the first 4 pins not the "W" one).
- #23
I've now made a video... I've added instructions as subtitles so make sure you turn subtitles on! Also, in the description I've put links to different parts of the video.I've got my other two fans ordered and I'll make a video of how to fully do this once they arrive and link to it.
Link: HD120 Modification For Asus Aura & Gigabyte Fusion Compatibility
Video:
[video="https://www.youtube.com/watch?v=fW5bhAd_OFI&t=1s"][/video]
- Jul 15, 2011
- 15,519
- 0
- 66,960
- 1,665
- #24
well done mate
edit--and gave you best answer since whether its a bit of time consuming work or not it still solves the problem originally asked
- Oct 20, 2016
- 22
- 0
- 1,520
- 1
- Advertising
- Cookies Policies
- Privacy
- Term & Conditions
- Topics
Rgb Fans That Work With Asus Aura
Source: https://forums.tomshardware.com/threads/are-rgb-fans-compatible-with-asus-aura.2981529/
0 Response to "Rgb Fans That Work With Asus Aura"
Post a Comment